Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by JennAir.
JennAir and related trademarks are the property of their respective owners.
F0E6 is a service-facing display on many JennAir cooktop controls, often tied to cooktop fault. Read the overview, stay within user-safe steps, and contact JennAir Appliance Repair if the message returns.
Reviewed by Marcus Hale · Last reviewed August 11, 2026
Written by
Marcus Hale Appliance Repair Content SpecialistPublished August 9, 2026Updated August 11, 2026Technically reviewed August 11, 2026
Reviewed Wording follows cited JennAir service literature; confirm decode on your exact model.
Paraphrased from Whirlpool-family / JennAir cooktop Product Help patterns; confirm for your model.
Error codeF0E6
ApplianceCooktop
Affected model seriesJennAir cooktop / induction — confirm your full model and serial
Quick answer
JennAir cooktop code F0E6: Cooktop fault. Confirm in the model guide.
Model compatibility: JennAir reuses codes across series and model years, so F0E6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F0E6 indicates a cooktop electronics/sensor family fault. One breaker reset; call service if it returns. The same characters can map to different service actions across wall ovens, dishwashers, or refrigeration. Verify against your exact model docs. JennAir Appliance Repair provides independent diagnosis — not a manufacturer service agency.
Signs
Symptoms you may notice
The cooktop displays F0E6 during operation
F0E6 appears without an obvious cause
The cooktop behaves inconsistently with F0E6 shown
Why it happens
Possible causes
A sensor reading out of range
A wiring or connection issue
A control interpreting the reading as a fault
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm the appliance has stable power
Check for visible blockages or obstructions
Record the full model number
Write down the exact display string, cycle mode, and whether the fault repeats
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Do not adjust, disconnect or repair any gas connection or valve
Get help
When to call a technician
If F0E6 persists after the safe checks above, contact a qualified appliance technician with your model and serial numbers. This site is independent repair guidance — not official JennAir service.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not affiliated with JennAir.
F0E6 indicates a cooktop electronics/sensor family fault. One breaker reset; call service if it returns.
Avoid clearing codes over and over to “force” a cycle. Capture F0E6 first; if it sticks after one careful reset, let JennAir Appliance Repair test the appliance.
The same characters can map to different service actions across wall ovens, dishwashers, or refrigeration. Verify against your exact model docs. JennAir Appliance Repair provides independent diagnosis — not a manufacturer service agency.
No. JennAir Appliance Repair publishes independent repair guidance for homeowners. For manufacturer documentation use producthelp.jennair.com and your model manual — then book an independent technician if the fault continues.
