Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by JennAir.
JennAir and related trademarks are the property of their respective owners.
F3E3 is a service-facing display on many JennAir dishwasher controls, often tied to temperature sensor. Read the overview, stay within user-safe steps, and contact JennAir Appliance Repair if the message returns.
Reviewed by Marcus Hale · Last reviewed August 11, 2026
Written by
Marcus Hale Appliance Repair Content SpecialistPublished August 9, 2026Updated August 11, 2026Technically reviewed August 11, 2026
Reviewed Wording follows cited JennAir service literature; confirm decode on your exact model.
Paraphrased from Whirlpool-family / JennAir Product Help dishwasher F#E# patterns; confirm on your model tech sheet.
Error codeF3E3
ApplianceDishwasher
Affected model seriesApplies to many JennAir built-in dishwasher installations; match your docs
Quick answer
JennAir dishwasher code F3E3: Temperature sensor. Confirm in the model guide.
Model compatibility: JennAir reuses codes across series and model years, so F3E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
F3E3 indicates an NTC/thermistor circuit fault. Do not bypass sensors — schedule diagnosis if it persists. The same characters can map to different service actions across wall ovens, dishwashers, or refrigeration. Verify against your exact model docs. JennAir Appliance Repair provides independent diagnosis — not a manufacturer service agency.
Signs
Symptoms you may notice
The dishwasher displays F3E3 and temperatures seem off
F3E3 appears intermittently during operation
The dishwasher behaves inconsistently with F3E3 shown
Why it happens
Possible causes
A temperature sensor reading out of range
A wiring or connection issue to the sensor
A control interpreting the reading as a fault
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm nothing is blocking internal vents or airflow
Note the actual behavior or temperatures if measurable
Perform a manufacturer-approved restart
Write down the exact display string, cycle mode, and whether the fault repeats
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If F3E3 persists after the safe checks above, contact a qualified appliance technician with your model and serial numbers. This site is independent repair guidance — not official JennAir service.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not affiliated with JennAir.
F3E3 indicates an NTC/thermistor circuit fault. Do not bypass sensors — schedule diagnosis if it persists.
Avoid clearing codes over and over to “force” a cycle. Capture F3E3 first; if it sticks after one careful reset, let JennAir Appliance Repair test the appliance.
The same characters can map to different service actions across wall ovens, dishwashers, or refrigeration. Verify against your exact model docs. JennAir Appliance Repair provides independent diagnosis — not a manufacturer service agency.
No. JennAir Appliance Repair publishes independent repair guidance for homeowners. For manufacturer documentation use producthelp.jennair.com and your model manual — then book an independent technician if the fault continues.
