Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by JennAir.
JennAir and related trademarks are the property of their respective owners.
For a JennAir dishwasher showing F10E4 (overflow), start with accurate notes—not panel teardown. JennAir Appliance Repair outlines meaning, symptoms, and when an independent technician should take over.
Reviewed by Marcus Hale · Last reviewed August 11, 2026
Written by
Marcus Hale Appliance Repair Content SpecialistPublished August 9, 2026Updated August 11, 2026Technically reviewed August 11, 2026
Reviewed Wording follows cited JennAir service literature; confirm decode on your exact model.
Paraphrased from Whirlpool-family / JennAir Product Help dishwasher F#E# patterns; confirm on your model tech sheet.
Error codeF10E4
ApplianceDishwasher
Affected model seriesSeen on JennAir built-in dishwasher platforms (verify your rating label)
Quick answer
F10E4 — Overflow on a JennAir dishwasher (verify for your model).
Model compatibility: JennAir reuses codes across series and model years, so F10E4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
In plain terms: F10E4 is an overflow / flood-protect style fault. Stop the cycle, check for standing water, and disconnect power if water is near electrics. Wording and recovery steps differ by JennAir model and control generation — confirm in your use & care guide or Product Help. Guidance from JennAir Appliance Repair is independent repair help, not official JennAir service.
Signs
Symptoms you may notice
The dishwasher halts and displays F10E4
You notice moisture or water near the dishwasher
The dishwasher won’t resume its cycle normally
Why it happens
Possible causes
A minor internal leak reaching the base
A loose or aging hose connection
Residual water triggering the protection system
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Switch the appliance off and, if safe, disconnect power
Check for visible water under or behind the appliance
Confirm hoses and connections are not visibly dripping
Write down the exact display string, cycle mode, and whether the fault repeats
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If F10E4 persists after the safe checks above, contact a qualified appliance technician with your model and serial numbers. This site is independent repair guidance — not official JennAir service.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not affiliated with JennAir.
F10E4 is an overflow / flood-protect style fault. Stop the cycle, check for standing water, and disconnect power if water is near electrics.
Yes for a single, calm reset after user-safe checks — no for repeated clears. Recurring F10E4 belongs with an independent technician at JennAir Appliance Repair.
Wording and recovery steps differ by JennAir model and control generation — confirm in your use & care guide or Product Help. Guidance from JennAir Appliance Repair is independent repair help, not official JennAir service.
No. JennAir Appliance Repair publishes independent repair guidance for homeowners. For manufacturer documentation use producthelp.jennair.com and your model manual — then book an independent technician if the fault continues.
