Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by JennAir.
JennAir and related trademarks are the property of their respective owners.
FCE1 is a service-facing display on many JennAir dishwasher controls, often tied to communication. Read the overview, stay within user-safe steps, and contact JennAir Appliance Repair if the message returns.
Reviewed by Marcus Hale · Last reviewed August 11, 2026
Written by
Marcus Hale Appliance Repair Content SpecialistPublished August 9, 2026Updated August 11, 2026Technically reviewed August 11, 2026
Reviewed Wording follows cited JennAir service literature; confirm decode on your exact model.
Paraphrased from Whirlpool-family / JennAir Product Help dishwasher F#E# patterns; confirm on your model tech sheet.
Error codeFCE1
ApplianceDishwasher
Affected model seriesApplies to many JennAir built-in dishwasher installations; match your docs
Quick answer
FCE1 · Communication · JennAir dishwasher — independent plain-language overview.
Model compatibility: JennAir reuses codes across series and model years, so FCE1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Typical reading on JennAir controls: FCE1 indicates a control communication fault. One full power reset; book diagnosis if it returns. Never assume one forum post or generic chart overrides your rating-plate model. Independent technicians at JennAir Appliance Repair test the live appliance rather than guessing from the code alone.
Signs
Symptoms you may notice
The dishwasher displays FCE1 and controls respond oddly
FCE1 appears at start-up or mid-cycle
Buttons or programs behave inconsistently with FCE1
Why it happens
Possible causes
An internal control or wiring fault
A communication issue between components
A transient electronics glitch
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm stable power at the outlet
Perform a manufacturer-approved restart once
Record the full model number for the technician
Save model and serial numbers so an independent technician can match parts correctly
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If FCE1 persists after the safe checks above, contact a qualified appliance technician with your model and serial numbers. This site is independent repair guidance — not official JennAir service.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not affiliated with JennAir.
FCE1 indicates a control communication fault. One full power reset; book diagnosis if it returns.
Avoid clearing codes over and over to “force” a cycle. Capture FCE1 first; if it sticks after one careful reset, let JennAir Appliance Repair test the appliance.
Never assume one forum post or generic chart overrides your rating-plate model. Independent technicians at JennAir Appliance Repair test the live appliance rather than guessing from the code alone.
No. JennAir Appliance Repair publishes independent repair guidance for homeowners. For manufacturer documentation use producthelp.jennair.com and your model manual — then book an independent technician if the fault continues.
