Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by JennAir.
JennAir and related trademarks are the property of their respective owners.
Homeowners search F3E7 when a JennAir dishwasher interrupts a cycle. The label “temperature sensor” is a starting clue. JennAir Appliance Repair explains safe documentation and when professional testing is the better move.
Reviewed by Marcus Hale · Last reviewed August 11, 2026
Written by
Marcus Hale Appliance Repair Content SpecialistPublished August 9, 2026Updated August 11, 2026Technically reviewed August 11, 2026
Reviewed Wording follows cited JennAir service literature; confirm decode on your exact model.
Paraphrased from Whirlpool-family / JennAir Product Help dishwasher F#E# patterns; confirm on your model tech sheet.
Error codeF3E7
ApplianceDishwasher
Affected model seriesTypical on JennAir built-in dishwasher; always confirm generation
Quick answer
F3E7 — Temperature sensor on a JennAir dishwasher (verify for your model).
Model compatibility: JennAir reuses codes across series and model years, so F3E7 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Homeowner summary: F3E7 means temperature monitoring failed a control check. One power cycle; book service if it returns. Wording and recovery steps differ by JennAir model and control generation — confirm in your use & care guide or Product Help. Guidance from JennAir Appliance Repair is independent repair help, not official JennAir service.
Signs
Symptoms you may notice
The dishwasher displays F3E7 and temperatures seem off
F3E7 appears intermittently during operation
The dishwasher behaves inconsistently with F3E7 shown
Why it happens
Possible causes
A temperature sensor reading out of range
A wiring or connection issue to the sensor
A control interpreting the reading as a fault
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm nothing is blocking internal vents or airflow
Note the actual behavior or temperatures if measurable
Perform a manufacturer-approved restart
Note any leak, odor, breaker trip, or unusual heat alongside the code
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If F3E7 persists after the safe checks above, contact a qualified appliance technician with your model and serial numbers. This site is independent repair guidance — not official JennAir service.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not affiliated with JennAir.
F3E7 means temperature monitoring failed a control check. One power cycle; book service if it returns.
Clearing is fine for record-keeping after notes are saved — it is not a repair. When F3E7 comes back on the next use, contact JennAir Appliance Repair.
Wording and recovery steps differ by JennAir model and control generation — confirm in your use & care guide or Product Help. Guidance from JennAir Appliance Repair is independent repair help, not official JennAir service.
No. JennAir Appliance Repair publishes independent repair guidance for homeowners. For manufacturer documentation use producthelp.jennair.com and your model manual — then book an independent technician if the fault continues.
