Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by JennAir.
JennAir and related trademarks are the property of their respective owners.
Seeing FEE7 on your JennAir dishwasher? It usually points toward sensor family. This independent guide from JennAir Appliance Repair covers symptoms, cautious checks, and clear next steps — without sending you to a factory “authorized” desk.
Reviewed by Marcus Hale · Last reviewed August 11, 2026
Written by
Marcus Hale Appliance Repair Content SpecialistPublished August 9, 2026Updated August 11, 2026Technically reviewed August 11, 2026
Reviewed Wording follows cited JennAir service literature; confirm decode on your exact model.
Paraphrased from Whirlpool-family / JennAir Product Help dishwasher F#E# patterns; confirm on your model tech sheet.
Error codeFEE7
ApplianceDishwasher
Affected model seriesSeen on JennAir built-in dishwasher platforms (verify your rating label)
Quick answer
FEE7 on JennAir dishwasher appliances often maps to sensor family — check your docs.
Model compatibility: JennAir reuses codes across series and model years, so FEE7 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Homeowner summary: FEE7 indicates an electronics/sensor family fault. Power-cycle once; persistent codes need service. Treat this as a plain-language orientation for homeowners. Final interpretation belongs to your model’s documentation and an on-site check by JennAir Appliance Repair when the fault returns.
Signs
Symptoms you may notice
The dishwasher displays FEE7 during operation
FEE7 appears without an obvious cause
The dishwasher behaves inconsistently with FEE7 shown
Why it happens
Possible causes
A sensor reading out of range
A wiring or connection issue
A control interpreting the reading as a fault
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm the appliance has stable power
Check for visible blockages or obstructions
Record the full model number
Photograph the full code and rating-plate model/serial before any reset
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If FEE7 persists after the safe checks above, contact a qualified appliance technician with your model and serial numbers. This site is independent repair guidance — not official JennAir service.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not affiliated with JennAir.
FEE7 indicates an electronics/sensor family fault. Power-cycle once; persistent codes need service.
You may clear the display once you have photographed it and completed only the manual’s user steps. Persistent FEE7 means diagnosis by JennAir Appliance Repair, not more DIY cycling.
Treat this as a plain-language orientation for homeowners. Final interpretation belongs to your model’s documentation and an on-site check by JennAir Appliance Repair when the fault returns.
No. JennAir Appliance Repair publishes independent repair guidance for homeowners. For manufacturer documentation use producthelp.jennair.com and your model manual — then book an independent technician if the fault continues.
