Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by JennAir.
JennAir and related trademarks are the property of their respective owners.
F2E5 on a JennAir dishwasher is most often discussed as a user interface condition. Below: typical meaning, what you may notice, safe homeowner checks, and when JennAir Appliance Repair should diagnose on site.
Reviewed by Marcus Hale · Last reviewed August 11, 2026
Written by
Marcus Hale Appliance Repair Content SpecialistPublished August 9, 2026Updated August 11, 2026Technically reviewed August 11, 2026
Reviewed Wording follows cited JennAir service literature; confirm decode on your exact model.
Paraphrased from Whirlpool-family / JennAir Product Help dishwasher F#E# patterns; confirm on your model tech sheet.
Error codeF2E5
ApplianceDishwasher
Affected model seriesJennAir built-in dishwasher — confirm your full model and serial
Quick answer
F2E5 — User interface on a JennAir dishwasher (verify for your model).
Model compatibility: JennAir reuses codes across series and model years, so F2E5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Homeowner summary: F2E5 indicates interface electronics trouble. Avoid pressing a wet or sticky panel; reset once. Wording and recovery steps differ by JennAir model and control generation — confirm in your use & care guide or Product Help. Guidance from JennAir Appliance Repair is independent repair help, not official JennAir service.
Signs
Symptoms you may notice
The dishwasher displays F2E5 and controls respond oddly
F2E5 appears at start-up or mid-cycle
Buttons or programs behave inconsistently with F2E5
Why it happens
Possible causes
An internal control or wiring fault
A communication issue between components
A transient electronics glitch
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm stable power at the outlet
Perform a manufacturer-approved restart once
Record the full model number for the technician
Save model and serial numbers so an independent technician can match parts correctly
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If F2E5 persists after the safe checks above, contact a qualified appliance technician with your model and serial numbers. This site is independent repair guidance — not official JennAir service.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not affiliated with JennAir.
F2E5 indicates interface electronics trouble. Avoid pressing a wet or sticky panel; reset once.
Often a single power-cycle after a documented user fix clears a stale message. If F2E5 reappears immediately, stop repeating resets and book JennAir Appliance Repair.
Wording and recovery steps differ by JennAir model and control generation — confirm in your use & care guide or Product Help. Guidance from JennAir Appliance Repair is independent repair help, not official JennAir service.
No. JennAir Appliance Repair publishes independent repair guidance for homeowners. For manufacturer documentation use producthelp.jennair.com and your model manual — then book an independent technician if the fault continues.
