Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by JennAir.
JennAir and related trademarks are the property of their respective owners.
For a JennAir dishwasher showing F2E3 (user interface), start with accurate notes—not panel teardown. JennAir Appliance Repair outlines meaning, symptoms, and when an independent technician should take over.
Model compatibility: JennAir reuses codes across series and model years, so F2E3 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Homeowner summary: F2E3 is a user-interface fault. Check panel responsiveness, wipe moisture, then reset power once. Never assume one forum post or generic chart overrides your rating-plate model. Independent technicians at JennAir Appliance Repair test the live appliance rather than guessing from the code alone.
Signs
Symptoms you may notice
The dishwasher displays F2E3 and controls respond oddly
F2E3 appears at start-up or mid-cycle
Buttons or programs behave inconsistently with F2E3
Why it happens
Possible causes
An internal control or wiring fault
A communication issue between components
A transient electronics glitch
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm stable power at the outlet
Perform a manufacturer-approved restart once
Record the full model number for the technician
Note any leak, odor, breaker trip, or unusual heat alongside the code
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not bypass door locks, safety switches or interlocks
Get help
When to call a technician
If F2E3 persists after the safe checks above, contact a qualified appliance technician with your model and serial numbers. This site is independent repair guidance — not official JennAir service.
Seeing this code on your JennAir appliance?
Book a specialist visit for a clear estimate and approval before any repair. Independent service — not affiliated with JennAir.
F2E3 is a user-interface fault. Check panel responsiveness, wipe moisture, then reset power once.
Yes for a single, calm reset after user-safe checks — no for repeated clears. Recurring F2E3 belongs with an independent technician at JennAir Appliance Repair.
Never assume one forum post or generic chart overrides your rating-plate model. Independent technicians at JennAir Appliance Repair test the live appliance rather than guessing from the code alone.
No. JennAir Appliance Repair publishes independent repair guidance for homeowners. For manufacturer documentation use producthelp.jennair.com and your model manual — then book an independent technician if the fault continues.
